Small Form-factor Pluggable, 3.125G DWDM, 1563.05NM(Tx Wavelength), 70KM, Channel Number :18, Center Frequency(THz) : 191.8

The 3.125 Gbps, 70 km, DWDM SFP transceiver module plugs into ADTRAN equipment designed to accept Small Form-factor Pluggables (SFPs). The SFP converts a 3.125 Gbps serial electrical data stream to a 3.125 Gbps optical output signal and a 3.125 Gbps optical input signal to a 3.125 Gb/s serial electrical data streams when installed into an appropriate host unit.

Designed for Ethernet LAN and WAN multi-rate applications at up to 70 km
links over single-mode fiber.

FEATURES

• SFP mechanical interface
• Duplex LC receptacle (optical interface)
• 20-pin connector (electrical interface)
• RoHS compliant

SPECIFICATIONS

• Optical Specifications
• Optical distance: 70 km
• Transmit power: 0 dBm to +4.0 dBm
• Receive power: –28 dBm to –7 dBm
• Optical budget: 28 dB (with 3 dB path penalty)
• Spectral Width: 0.4 nm maximum (20.0 dB Spectral Width)
• Extinction Ratio: 6.0 dB minimum
• SMSR: 30 dB minimum
• Power Penalty: 3.0 dB
• Minimum Span Attenuation: 12.0 dB
• Receive sensitivity: –28.0 dBm
• Receive wavelength: 1520 nm to 1570 nm
• Transmit wavelength: (see table on page 1)
• Signaling speed: 1 Gbps to 3.125 Gbps
• DWDM channel spacing: 100 GHz

NEW IN THE BOX